Send an Email
Download a Deep Till brochure (PDF file)
Why Deep Tilling Works: Today's heavier equipment and continuous plowing at the same depth creates plow sole or hard pan. This plow sole forms a barrier which seriously hinders the penetration and percolating of moisture in the field. Deep tilling breaks up this plow sole, hard pan and wheel compaction and allows moisture to percolate throughout the soil and at the same time retains this valuable sub-soil moisture.
Several Models and Sizes to Choose From:
3, 5 or 7 shank 3 pt. mounted single frame with manual gauge wheels.
5 shank 3 pt. mounted double frame with manual gauge wheels. Also shown, pull type double frame with 5, 7, 9 or 11 shanks and hydraulic gauge wheels.
5 shank, 30 inch single rank machine converted into 7 shank with 24 inch spacing.
Pull type model with 15" spacing between shanks. Can be used as Chisel Plow or for Deep Till. Shown with optional hydraulic lift rear disk levelers.
Single or Solid Trash Cutters:
The single coulter trash cutter is for 30" spaced deep tills. It consists of a single 18" coulter per shank. Coulter pivots when turning and is spring loaded for protection in rocks.
Zone Till shank assembly available to rip the ground with minimum top soil disturbance. Download Zone Till brochure
TEBBEN'S New Zone Till Shank fractures compacted ground while leaving residue on top. Tebben Enterprises Automatic Reset Shank Assembly will trip over rocks and other obstacles while maintaining up to a 22" digging depth. Front cutting coulters ahead of each shank helps leave surface residue and soil relatively undisturbed.
- Adjustable Point Pressure Up To 2,400 Pounds
- Automatic Reset Assembly
- Heavy 5" x 7"Tube Frame
- Category II or III 3 Point
- Manual Gauge Wheels Including Tires
- 3 to 8 Shank Models Available on 22", 24" or 30" Spacing
- Replaceable Wear Bar and Shovels
- 36" Underframe Clearance
- Optional Heavy or Light Duty Disc Assembly
How The Automatic Reset Leaf Spring Works
Both single frame and double frame Tebben Deep Till provide the simple automatic reset feature which means non-stop tilling for more production per day. Sizes range from 7-1/2' to 27-1/2' and shank spacing of 15" to 30" depending on model. Parabolic shanks require less horsepower and penetrating hard pan is never a problem. Horsepower requirements will vary depending on soil conditions and depth, but 25 to 30 H.P. per shank is a good rule of thumb.
Optional Ridge Ripper Levels ridges
and penetrates the ground with
the Tebben Redge Ripper.
Levelator Level ridges and break up clods with a Tebben Levelator.
Disc Leveler Disc Leveler attaches to deep till shank went through creating a ridge which will settle over winter.
"Lifter Point" Disc Leveler attaches to deep till shank went through creating a ridge which will settle over winter.
Helper Leaf Spring
Adds approximately 200 lbs. of point pressure. Up to 4 can be added per shank.